Panel Options

Stock Cut Panel
3" o.c. (on center) 15 grooves per 4'x8' panel
Vertical Cut Panel
3" o.c. (on center) 31 grooves per 4'x8' panel
2" o.c. 23 grooves per 4' x 8' panel
4" o.c. 11 grooves per 4' x 8' panel
6" o.c. 7 grooves per 4' x' 8' panel
12" o.c. 3 grooves per 4' x 8' panel
With edge cuts Without edge cuts
No top cut option leaves a half groove on one edge for stacking two panels together.

Groove Options

Painted Grooves
to match, or custom colors to accent
PVC Accent Strips
white, gray, red, black and almond. 625' roll covers 5-3" o.c. panels
Plastic Inserts
cover the full groove and add approximately 5% to the strength of the panel. Colors: white, gray, red, almond, and black.
Metal Inserts
can double the strength of the groove when screwed through to the stud wall behind. Available in Mill Aluminum, Gold Anodized, Black Anodized, and Custom Painted.

Painted Panels
offer the advantage of being easily repainted. They can be finished in any color.
Clear Finish
seals the panel. Wind Mill uses a clear urethane water-based acrylic finish.
Wind Mill uses MinWax™ stains.
Panels can be color matched to your specs. Other stains available.
Multispec™
is a very durable multi-colored spray paint finish available in 42 mixed colors.

Splicing Woodgrain
laminate is done to allow a vertical cut panel to have the grooves running with the grain direction.
1 1/2" board
grooved 2 sides make an excellent center panel for fixtures displaying off both sides 2 - 3/4" panels glued together
Offset slatwall
3/4" border alternating grooves - machined both sides.

Recycle logo

Wind Mill's slatwall is produced from by-products of the wood industry. Slatwall's primary ingredients come from earth friendly renewable resources.

Call our sales department at 1.800.548.7528 for further information on Wind Mill Slatwall panels and components. email: sales@windmillslatwall.com