Skip navigation to main content

Slatwall Panel Options

Slatwall Groove Spacing Options:

  • Stock Cut Slatwall Panel
    3" o.c. (on center)
    15 grooves per 4'H x 8'L panel


  • Vertical Cut Slatwall Panel
    3" o.c. (on center)
    31 grooves per 4'H x 8'L panel

  • 2" o.c. (on center)
    23 grooves per 4'H x 8'L panel

  • 4" o.c. (on center)
    11 grooves per 4'H x 8'L panel

  • 6" o.c. (on center)
    7 grooves per 4'H x' 8'L panel

  • 12" o.c. (on center)
    3 grooves per 4'H x 8'L panel

  • Vetrical cut panel with edge cuts With edge cuts Without edge cuts

    No top cut option leaves a half groove on one edge for stacking two panels together.

Slatwall Groove Options:

  • Painted Grooves

    Painted Grooves

    to match,
    or custom colors
    to accent.
  • Slatwall with PVC Accent Strips

    PVC Accent Strips

    white, gray, red, black and almond. 625' roll covers 5-3" o.c. panels
  • Slatwall with plastic inserts

    Plastic Inserts

    cover the full groove - white, gray, red, almond, and black.

  • Slatwall with metal inserts

    Metal Inserts

    can double the strength of the groove when screwed through to the stud wall. Available in Mill Aluminum, Gold Anodized, Black Anodized, and Custom Painted.

Slatwall Finishing Options:

  • Painted Panels

    offer the advantage of being easily repainted. They can be finished in any color.

  • Clear Finish

    seals the panel. Wind Mill uses a clear urethane water-based acrylic finish.

  • Multispec

    Multispec™

    available in 42 mixed colors, is a durable multi-colored finish.
  • Stained Panels

    Stained Panels

    can be color matched to your specs.

Other Slatwall Options:

  • Splicing Woodgrain

    laminate allows a vertical cut panel to have the grooves running with the grain.

  • 1 1/2" board

    1 1/2" board

    grooved 2 sides makes an excellent center panel for fixtures displaying off both sides.
  • Offset slatwall

    Offset slatwall

    3/4" alternating grooves - machined both sides.


Environmental Information:

Environmental logos

Recycle logo

Wind Mill's Slatwall is produced from by-products of the natural wood industry. Slatwall's primary ingredients come from earth friendly renewable resources. Wind Mill is an Environmentally Preferred Product provider. NAUF panels, FSC certification and Leed points are available.

Call our sales department at 1.800.548.7528 for further information on Wind Mill Slatwall panels and components. email: sales@windmillslatwall.com

View as PDF