Wind Mill Slatwall

White Melamine Slatwall

White Slatwall ApplicationWhite slatwall is our largest selling slatwall finish and the best value for retail display environments. Our distributors offer 48'' x 96'', 3" on-center white slatwall. Major home improvement chains, such as Home Depot and Do It Best, also offer white slatwall, or slat board, as some refer to it. White slatwall is manufactured using MDF (medium density fiberboard) or using Wind Mill Slatwall Products exclusive Boise Anchor™ Core slatwall. Anchor™ Core is 50% stronger than standard MFD and is engineered specifically for slatwall applications.

Slatwall is easy to install using common drywall screws or other fasteners screwed through the grooves into wood or metal studs. If installing to metal studs, we recommend wood backing where the fasteners will be installed. Visit our slatwall installation page for more information.

The color is a close match to Wilsonart 1573 - 6 or Formica 949 high pressure laminate. Wind Mill uses a Low Pressure Melamine (LPL) to coat the surface of its white slatwall providing a durable finish with clean, dust-free grooves.

Panels come with a half groove on the top and bottom for easy stacking. If necessary, the half groove can easily be trimmed by a skilled installer.

Custom Slatwall Options

  • Groove spacing: 2", 4", 6", 8", 12", or custom.
  • Ready-Sert™: The panels can be used with or without Ready-Sert™ metal inserts. Ready-Sert™ panels and inserts are available at some distributors. Call Wind Mill at 800.548.7528 for a list of distributors.
  • Plastic inserts: Use plastic inserts as a decorative enhancement.
  • Painted grooves: Painted grooves are another decorative option.
  • Special sizes: 8'x4', 5'x8', 8'x5', 4'x10', 10'x4', 5'x10', and 10'x5' (second number = groove direction).
  • Cut: Optional cut sizes available.
  • Accessories: Our distributors offer chrome, wire, and acrylic accessories. Home Depot and Do It Best stock a variety of home slatwall accessories.

anchor testing Anchor™ Core is testing out to be 50% stronger than standard MDF. Boise Cascade has recognized other engineered panels are produced with a primary focus on surface smoothness and hardness—leaving the center core out of the critical equation.

Slatwall requires both a hard, smooth surface, as well as a strong core. Boise Anchor™ Core offers a strong core using the exact resin compounds, adhesives, and press times needed to produce a superior slatwall core. Choosing Anchor™ Core slatwall reduces breakout, failure, and damage to panels or displayed merchandise. Anchor Core is exclusively available at Wind Mill.

If you are worried about slatwall holding strength, internal bond strength, or slatwall load capacities, Anchor™ Core by Wind Mill is an excellent option. Anchor™ Core slatwall can be combined with standard slatwall accessories, including: waterfall arms, face out arms, down-slant arms, hang bars, hooks, and slatwall shelf brackets.




© 2015 Wind Mill Slatwall™ Products
200 Balsam Road   |   Sheboygan Falls, WI 53085   |   800.548.7528