Wind Mill Slatwall

Common Wood Veneer Series

Common Veneers for Slatwall are shown below. Click on the image to learn more about each.

Oak Veneer Slatwall

Red Oak Veneer

Maple Veneer Slatwall

Birch Veneer

Birch Veneer Slatwall

Maple Veneer

Knotty Pine Veneer Slatwall

Knotty Pine Veneer

All the veneers carry a Class A-4 grade. This indicates that the face has a A grade, and the back is a mill option. The Red Oak, Birch and Maple veneers are rotary cut. The Knotty Pine is plain sliced. The Birch and Maple are called "Natural" - these can have a mix of heartwood and sapwood on the same face.

Veneers

Red Oak Veneer Slatwall (Rotary Cut)

Oak Veneer SlatwallRed Oak veneers are a natural material with variations in color, texture, and figure. Red Oak veneers come rotary cut with an A-Face and mill option veneer back. The acceptable / allowable face grade characteristics of this veneer are: mostly heartwood (the inner layers - usually darker in color, 90 - 100%) and up to 10% sapwood (the outer layers of the tree - usually lighter in color) can be present on the same face. Color streaks, vine marks, and cross bars are also allowed in restricted quantities and sizes. The natural color of this veneer can range from reddish tan to brown.

Birch Veneer Slatwall (Rotary Cut)

Maple Veneer SlatwallBirch Veneers are a natural material with variations in color, texture and figure. Natural Birch veneer is a Rotary Cut with an A-Face and mill option back. The acceptable / allowable face grade characteristics of this veneer are: both heartwood (the inner layers - usually darker in color) and sapwood (the outer layers of the tree - usually lighter in color) can be present on the same face. Other characteristics such as scattered small burls and slight vine flecks are allowed. The natural color of this veneer can range from near white to reddish brown.

Maple Veneer Slatwall (Rotary Cut)

Birch Veneer SlatwallMaple Veneers are a natural material with variations in color, texture and figure. Natural Maple veneer is a Rotary Cut with an A-Face and mill option back. The acceptable / allowable face grade characteristics of this veneer are: both heartwood (the inner layers - usually darker in color) and sapwood (the outer layers of the tree - usually lighter in color) can be present on the same face. Other characteristics such as scattered small burls and slight vine flecks are allowed. The natural color of this veneer can range from near white to reddish brown.

Knotty Pine Veneer Slatwall (Plain Sliced)

Knotty Pine Veneer SlatwallKnotty Pine Veneers are a natural material with variations in color, texture and figure. Natural Knotty Pine is a Plain Sliced Cut with an A-Face and mill option back. The acceptable / allowable face grade characteristics of this veneer are: light yellow to creamy white sapwood with reddish brown heartwood. Resin ducts forming narrow brown lines parallel to the grain are allowed as are large number and varying sizes of knots. The natural color of this veneer can range from light yellow to reddish brown.




© 2015 Wind Mill Slatwall™ Products
200 Balsam Road   |   Sheboygan Falls, WI 53085   |   800.548.7528